Back to Research Database

Granular activated carbon for low-cost passive sampling of anthroponotic microbial hazards in agricultural water sources

Principal Investigator:
Aaron Bivins, Ph.D.
Contact information:
Institution:
University of Georgia
GA USA
Co-Investigator(s):
Not applicable
Project Dates:
01/01/2027 - 12/31/2028
Award (RFP) Year:
2026
Amount Funded:
$287,733

Summary

The Food Safety Modernization Act Produce Safety Rule requires covered farms to perform an annual pre-harvest agricultural water assessment to inform risk management. Historically, farms have made use of grab sampling and fecal indicator bacteria (FIB) measurements for such assessments; however, grab sampling and measuring FIBs can be inaccurate for measuring risks associated with human viruses and parasites. The purpose of this project is to develop and validate a low-cost passive sampler made of granular activated carbon (GAC) and a rapid field-testing kit to achieve sensitive measurements of human-specific fecal markers in pre-harvest agricultural surface waters. The project will employ lab-based batch reactor experiments to characterize the passive sampler uptake of target microorganisms and human sewage release experiments in experimental streams to verify GAC passive sampler performance. GAC-derived samples will be used to optimize a color-change based test for human-specific fecal marker HF183. The fully optimized workflow will be deployed in field-based challenge testing at working farms to ensure it is sufficient for real-world application. If successful, the adaptable GAC passive sampling platform would enable working farms to make more accurate assessments of the risks posed by human sewage contamination in pre-harvest agricultural waters.

Technical Abstract

The Food Safety Modernization Act Produce Safety Rule requires covered farms to perform an annual pre-harvest agricultural water assessment to address “known or reasonably foreseeable hazards”, which could include viruses and parasites from human sewage. Traditionally, farms have employed grab sampling and E. coli measurements, but fecal indicator bacteria (FIB) are not sufficiently reliable for detecting contamination by human sewage, especially at low or sporadic levels. Passive sampling with low-cost granular activated carbon (GAC) samplers shows strong potential for detecting human fecal contamination in water. Unlike grab samples, passive samplers are immersed in the water continually allowing them to uptake microorganisms that are sporadically present or present at trace levels through a spontaneous process called adsorption. When combined with loop-mediated isothermal amplification (LAMP) testing for microbial source tracking (MST) markers specific to human sewage (e.g., HF183 or CrAssphage), GAC passive sampling could provide working farms with an adaptable, field-friendly platform for performing water risk assessments relevant to human sewage. The aim of this project is to develop and validate a GAC passive sampler and LAMP field-testing kit to achieve sensitive measurements of human-specific fecal markers in pre-harvest agricultural surface waters through four research objectives (RO). In RO1, we will characterize the adsorptive performance of GAC under diverse physicochemical water conditions in lab-based batch reactors to ensure kinetic and equilibrium characteristics that are reliable for quantitative risk assessment in a variety of surface water types. During RO2, at a one-of-a-kind experimental facility, we will deploy GAC passive samplers into outdoor open channel streams and release human sewage plumes at varying levels to verify passive sampler adsorption performance in experimental streams mimicking real-world plug flow conditions. In RO3, we will validate the performance of our previously developed HF183 LAMP assay when used on GAC-derived DNA extracts and develop a field friendly DNA extraction method compatible with the LAMP chemistry. Finally, during RO4, we would field test the fully developed GAC passive sampling and LAMP testing workflow at working farms to optimize the protocols for the constraints and challenges associated with these settings. We will publish the final optimized protocol, which utilizes materials that are openly available on the market, to an open-source platform (Protocols.io) for use by others. If successful, we estimate the validated and adaptable GAC passive sampling and LAMP platform could enable more accurate assessments of the risks posed by human sewage contamination at more than 2,000 produce farms using surface waters for pre-harvest irrigation.

Research Objectives

RO1. Characterize the adsorptive performance of GAC for fecal indicator bacteria and human-specific fecal markers from water under varying physicochemical conditions in lab-scale batch reactors.

Purpose – Quantify the GAC passive sampler uptake of FIB and MST markers from water to ensure reliable performance under different conditions.

RO2. Validate the performance of GAC passive samplers for measuring human fecal contamination via release experiments in open channel flow systems at the Notre Dame Linked Experimental Ecosystem Facility (ND-LEEF).

Purpose – Determine the reliability of GAC passive samplers for detecting and quantifying human sewage contamination of real-world open channel streams.

RO3. Optimize a loop-mediated isothermal amplification (LAMP) workflow for use with GAC passive samplers as a rapid in-field testing method for human specific fecal contamination.

Purpose – Develop a rapid field test for human-specific fecal markers that is compatible with GAC passive sampler-derived material.

RO4. Field trial GAC passive samplers for testing pre-harvest source waters at working farms for human specific fecal contamination using both in-field LAMP and lab-based analysis methods.

Purpose – Field validate and optimize the GAC + LAMP workflow for real-world use on working farms.

Findings & Recommendations

This project is ongoing. A final report will be provided when the project is finished.